V10 - V30 Change List

Version: 12.11.05 
- Added some cleanup to manufacturing configuration code
- Removed error 90 for DLT drives as it was discovered to be not applicable
- Added support for E-Copy and hard Node IDs for Fibre drives
- Added MIB stuff ...................
- Corrected error in move_rot_move
- Prevent robot fingers from hitting eject buttons for SDLT.
- Restrace picker when DOOR UNLOCK for SDLT.
- Changed extend dlt so that the last 50 steps of the drive load move is profiled. This eliminated the SCSI 03 sense key load errors.
- Reduced the amount of hold time on cartridge push from 500ms to 200 ms for SDLT for above problem as well
- Added LCD configuration of the SCSI inquiry data. User selects either "EXABYTE" or "PLASMON" and the correct vendor and product ID are invoked. "EXABYTE" is new build default. Matrix below should be used for test

VENDOR ID	    PRODUCT ID
  |	                |
 \ /                   \ /

EXABYTE	  DRIVE     TYPE
	
  NUMBER                 LTO             AIT-2             SDLT

           1         Exabyte 110L     Exabyte 215     Exabyte 19SD
          
           2         Exabyte 221L     Exabyte 430     Exabyte 218SD



PLASMON	  DRIVE     TYPE
	
  NUMBER             LTO     AIT-2     SDLT

           1         FTA      FTA      FTA
          
           2         FTA21    FTA21    FTA21

Version: 12.11.4 
- Fix Custom Vdndor ID display
- Change Exabyte strings to Plasmon
- Change MAC Address handling
- Fix length problem when setting System Name data
- Change Default System Location